SYSTEM WARNING: 'date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.' in '/usr/share/mantis/www/core.php' line 264
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4576 | [Endian Firewall] VPN - IPSec | major | unable to reproduce | 2013-09-24 13:35 | 2017-08-26 00:33 |
|
|||||
Reporter: | jeevan | Platform: | |||
Assigned To: | OS: | ||||
Priority: | urgent | OS Version: | |||
Status: | feedback | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | ip sec vpn for 3 sites | ||||
Description: |
i need to connect with ipsec for 3 sites 1. Site-A 2. Site-B 3. Site-C i am able to connect site A and B but not able to connect Site A and C Can u pls suggest |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4578 | [Endian Firewall] Intrusion Prevention | major | sometimes | 2013-10-02 10:50 | 2017-05-16 22:35 |
|
|||||
Reporter: | mhLearn | Platform: | |||
Assigned To: | Anonymous | OS: | |||
Priority: | high | OS Version: | 2.5.2 | ||
Status: | resolved | Product Version: | 2.5 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | future | ||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Remote Desktop Connection Failed When "Allow With IPS" | ||||
Description: |
Remote Desktop Connection, port 3389 and 3390 were Allow With IPS on outgoing traffic and working fine all the time from version 2.5.1, then upgraded to 2.5.2 last month. After snort rule was auto updated on today afternoon, then it failed to work. Changed the rule to just Allow, then it able to get through. On the firewall log, it showed "OUTGOINGFW:ALLOW:12",when ports were Allow With IPS, but connection were failed. But if changed to Allow, then showed "OUTGOINGFW:ACCEPT:12" and connection was successful. |
||||
Steps To Reproduce: | |||||
Additional Information: |
Things were done to test, 1. Restart efw system 2. Save and restart the SNORT 3. Tried on different computers 4. Tried on different zones |
||||
Attached Files: |
IPS_error_tcp port 1433.jpg (29,593) 2013-10-03 02:12 https://bugs.endian.com/file_download.php?file_id=1062&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3483 | [Endian Firewall] Proxy HTTP | major | always | 2011-02-15 20:27 | 2014-07-28 18:10 |
|
|||||
Reporter: | am89 | Platform: | |||
Assigned To: | lorenzo-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.4.1 | ||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Http proxy error 110 connection timed out | ||||
Description: | Hi! i've configured endian as a firewall and transparent proxy and all seemed to work well since some days ago, now when i try to connect to mail.alice.it an Italian provider i can't because the proxy gives me this message: (110) error connection timed out, but if i turn off the proxy it works, i have cleaned the cache and also turned off and then on the proxy, also restarted endian but with the proxy on the page doesn't work...why? | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
1126 | [Endian Firewall] Other Services | major | have not tried | 2008-07-14 13:13 | 2014-01-08 06:52 |
|
|||||
Reporter: | simon-endian | Platform: | |||
Assigned To: | chris-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | future | ||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Traffic Monitoring Administration interface does not work | ||||
Description: |
problem in Services --> Traffic Monitoring : Administration interface does not work... I need to disable then enable traffic monitoring for accessing to the web console... but many hours of data is not collected... |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4394 | [Endian Firewall] Hardware related (kernel, drivers, hardware) | tweak | always | 2012-07-18 14:45 | 2013-11-26 15:39 |
|
|||||
Reporter: | EDV-Team | Platform: | |||
Assigned To: | luca-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.5 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | future | ||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Support for Intel 82580 based network cards (Ethernet-Server-Adapter I340-T4) | ||||
Description: |
The Intel Ethernet-Server-Adapter I340-T4 and other Intel 82580 based network cards don't work on Endian 2.5.1. There is a Linux driver on the Intel website: http://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=13663 [^] Please add this driver to EFW Community Edition or provide a Kernel source package so that users can compile the driver itself. Thank you very much! |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4033 | [Endian Firewall] GUI | minor | always | 2011-07-22 08:28 | 2013-11-23 03:34 |
|
|||||
Reporter: | davide-endian | Platform: | |||
Assigned To: | Anonymous | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.4 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | future | ||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | wrong redirection from the / url, when natted | ||||
Description: |
endian_appliance: endian appliance on a local network. public_server: computer on the same local network and with a public IP. On public_server there's a NAT rule for connections to tcp port 10444, mapping it to endian_appliance:10443 Connecting to https://public_server:10444/ [^] the correct certificates exchange with endian_appliance takes place, but after that the login never appears, since you're redirected to https://local_ip_of_endian_appliance:10443/ [^] |
||||
Steps To Reproduce: | |||||
Additional Information: | Connecting to https://public_server:10444/manage/dashboard/ [^] (or other /manage/ or /cgi-bin/ urls) works fine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
2811 | [Endian Firewall] Other Services | major | always | 2010-04-02 04:53 | 2013-10-14 17:09 |
|
|||||
Reporter: | CALYSTO | Platform: | |||
Assigned To: | test | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.3 | ||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | DNS Dynamic with zoneedit isn´t work for empty Host Name | ||||
Description: |
Hi, i´m having problems with DNS Dynamic service when i use zoneedit. I put the file of the issue 0001372. This work´s fine when i complete something in the field of Host Name, zoneedit update really fast the changes. But in zoneedit i don´t need complete this field (Host Name), for that reason when i don´t write anything in Host Name, and click on Add, the line of the new dynamic dns appear but don´t update in the zoneedit zone. I come from IpCop but when i discover Endian, i try and try and try because this is a really good firewall and really like it, more than ipcop, but i can´t do work. Please help. Thanks for all. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4573 | [Endian Firewall] DHCP Server | minor | always | 2013-09-19 17:41 | 2013-09-26 16:41 |
|
|||||
Reporter: | junior.eng.br | Platform: | |||
Assigned To: | junior.eng.br | OS: | |||
Priority: | high | OS Version: | |||
Status: | resolved | Product Version: | 2.5 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | dhcp fixedleases | ||||
Description: | When we insert or delete a Mac fixed in DHCP Server rule does not apply. | ||||
Steps To Reproduce: | Services --> Add a fixed lease | ||||
Additional Information: | |||||
Attached Files: |
Capturar_dhcp.PNG (11,590) 2013-09-19 17:41 https://bugs.endian.com/file_download.php?file_id=1060&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4577 | [Endian Firewall] Uncategorized | major | always | 2013-09-25 05:06 | 2013-09-25 05:06 |
|
|||||
Reporter: | kjameson | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Version 2.4.1 Memory Leak | ||||
Description: | Memory Leak - Exactly same as 0000117 - Must reboot every week ... otherwise system crashes. | ||||
Steps To Reproduce: | Wait 1 week ... | ||||
Additional Information: | Apparently this never got fixed? | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4272 | [Endian Firewall] Hardware related (kernel, drivers, hardware) | minor | always | 2012-02-05 19:56 | 2013-09-24 20:53 |
|
|||||
Reporter: | Byzt | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | acknowledged | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Endian 2.5.1 does not support IBM x3250 Servers | ||||
Description: | I'm installing endian 2.5.1 for ibm x3250 but does not support. Endian 2.4.1 is working on x3250 | ||||
Steps To Reproduce: | |||||
Additional Information: | x3250 model no : 4364 | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3266 | [Endian Firewall] DHCP Server | tweak | always | 2010-11-08 08:31 | 2013-09-24 09:04 |
|
|||||
Reporter: | gmar_87 | Platform: | |||
Assigned To: | simon-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.4 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 2.3 | ||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Expired Leases | ||||
Description: |
Expired DHCP leases are never cleared from Endian Firewall. I have leases from August 2010 still appearing in the web-interface. The only way i can clear them is to edit or delete the dhcpd.leases file in /var/efw/dhcp Can a feature be added so that we can choose how long to keep expired leases (1 week, 2 weeks, etc..)? |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Endian_2.4.1_DHCP_ExpiredLease.jpg (22,123) 2010-11-24 09:20 https://bugs.endian.com/file_download.php?file_id=549&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4574 | [Endian Firewall] Proxy HTTP | major | always | 2013-09-22 10:11 | 2013-09-22 19:50 |
|
|||||
Reporter: | BT | Platform: | |||
Assigned To: | OS: | ||||
Priority: | urgent | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | HTTPS connections with Endian Firewall 2.5.2 | ||||
Description: |
Hello, I'm Using Endian Firewall 2.5.2 Community Edt. I use transparent proxy mode if I try https site not opening sample https://www.google.com [^] and try watch to youtube video failed. My Hardware Config Intel i5 3210 2 GB Ram Red(PPPoe)+Green(Local Lan) Interface |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
2914 | [Endian Firewall] Hardware related (kernel, drivers, hardware) | feature | always | 2010-05-23 17:37 | 2013-09-21 01:59 |
|
|||||
Reporter: | deepthought | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.3 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Hyper-V Network-Drivers Support | ||||
Description: | Support for Hyper-V native "Network Adapter", works currently only with mindboggingly slow "Legacy Network Adapter", max throughput approx 10 MBit | ||||
Steps To Reproduce: | |||||
Additional Information: | Running efw virtualized might not be the suggested way, but somehow keeps coming I guess. See: http://endian-forum.de/index.php?page=Thread&postID=85#post85 [^] (in german). Beside me there seem to be more users who would appreciate running a efw instance as Hyper-V Guest OS. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4571 | [Endian Firewall] Proxy - HTTP | minor | always | 2013-09-18 09:09 | 2013-09-20 09:12 |
|
|||||
Reporter: | spewk | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Slow HTTPS connections with Endian Firewall 2.5.2 | ||||
Description: |
Hi all, after updating 3 installations of Endian Firewall, from version 2.5.1 to 2.5.2, i'm experiencing a really slow connection to HTTPS sites i can experience this both with Windows XP and Windows 7, using Internet Explorer 8, 9 or 10 I haden't this problem with 2.5.1 Some clients are strangely not affected by this problem, but i haven't found any clue (they're using the same content filter, same firewall rules, same Internet Explorer config) for example, if i try to connect to www.microsoft.com via HTTP it gets 3 seconds to have the full page displayed, if i try the HTTPS version it needs 20 seconds! My configuration: Endian firewall 2.5.2 on VmWare ESXi 4.1, with 2 CPUs and 2 gb RAM. 2 of them have the RED on Ethernet static, the other one is configured in Gateway mode. AD Joined proxy with some sites open to everyone (no login) on Squid and other ones with AD groups + Dansguardian rules The problem is occuring with both the "no login" and Dansguardian sites Daniele |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4441 | [Endian Firewall] Proxy HTTP | block | always | 2012-08-29 11:28 | 2013-09-20 09:00 |
|
|||||
Reporter: | ardit-endian | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Proxy Maximum upload/download size not working | ||||
Description: |
When we set the limit, example 6000 / 6000 or 10000 / 10000 which actually means 10MB, the bigger files are blocked correctly however no webpage could be visited, either light ones like google.com |
||||
Steps To Reproduce: | |||||
Additional Information: |
Reproduced with 2.5, to reproduce, just set the limits and try to navigate. I did notice on the logs anything relevant except a warning: 2012/08/29 12:26:52| WARNING: No units on 'request_body_max_size 10000KB', assuming 10000.000000 bytes which actually doesn't say much. A customer reproduced this on different firewalls, actually he didn't had this issue with 2.4 |
||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4270 | [Endian Firewall] Proxy HTTP | minor | always | 2012-02-05 16:22 | 2013-09-20 09:00 |
|
|||||
Reporter: | tradermail-enupdate | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | acknowledged | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | 'Maximum download size' proxy setting does not work | ||||
Description: |
Setting a value in 'Maximum download size (incoming in KB)' under Proxy > Configuration > Proxy Settings does not work I have looked in the '/etc/squid/squid.conf.tmpl' file and it looks like there may be a bug in the configuration. reply_body_max_size ${MAX_INCOMING_SIZE}KB allow from_all I was able to get the 'Maximum download size' working by changing the line to reply_body_max_size ${MAX_INCOMING_SIZE} allow from_all Then entering the value in the GUI as bytes not KB |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4563 | [Endian Firewall] Endian Firewall GUI | major | always | 2013-08-28 23:03 | 2013-09-19 22:28 |
|
|||||
Reporter: | msoliveira01 | Platform: | |||
Assigned To: | luca-endian | OS: | |||
Priority: | immediate | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | The antispyware service can not be disable on GUI or the white/black list to be edit | ||||
Description: |
The new antispyware feature can not be disabled on version 2.5.2 by the GUI, when we try to save the modifications or disable the service, all we can see is a white screen trying to apply the modifications The interface only back if we refresh the page, but the modifications are not applied. The problem is that a lot of URL that are in the black list are a phishing like www.bradesco.com.br that is a Bank web site. |
||||
Steps To Reproduce: | Proxy -> DNS ->anti-spyware | ||||
Additional Information: | |||||
Attached Files: |
Endian 2.5.2.jpg (122,141) 2013-08-28 23:03 https://bugs.endian.com/file_download.php?file_id=1055&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4572 | [Endian Firewall] Hardware related (kernel, drivers, hardware) | block | always | 2013-09-19 10:10 | 2013-09-19 10:10 |
|
|||||
Reporter: | epiphany | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Error Reading Target Device | ||||
Description: |
Hello, I have a problem installing on a congatec mainboard! The installation always says "Error reading target device" by clicking "OK" it says: "HArddisk to small"! I think the endian installation do not know the chipset of congatec mainboard. Can somebody help to improve the error? Thanks |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4449 | [Endian Firewall] QoS | minor | always | 2012-09-04 02:17 | 2013-09-12 08:10 |
|
|||||
Reporter: | mhLearn | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Qos Device Name Changed When Edit Existing Entry | ||||
Description: | When tried to edit existing QoS entry, i.e. VLAN ID tagged BLUE zone, device name changed to VPN IPSEC after saved. | ||||
Steps To Reproduce: | |||||
Additional Information: | version 2.5.1 | ||||
Attached Files: |
Qos Issue 4.jpg (154,404) 2012-09-04 02:17 https://bugs.endian.com/file_download.php?file_id=983&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4570 | [Endian Firewall] Network related (VPN, uplinks) | minor | always | 2013-09-11 05:54 | 2013-09-11 05:54 |
|
|||||
Reporter: | mhLearn | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | 2.5.2 | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | PPPoE Connection Hard To Establish | ||||
Description: | After upgrade to v2.5.2, once the connection was down, it was very hard to connect back. Sometimes, it took more than a hour to connect again. | ||||
Steps To Reproduce: | |||||
Additional Information: | It was upgraded from 2.5.1 to 2.5.2, and no change make on the PPPoE settings. | ||||
Attached Files: |
PPPoE Connection Log.txt (15,773) 2013-09-11 05:54 https://bugs.endian.com/file_download.php?file_id=1059&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4569 | [Endian Firewall] Endian Firewall | minor | have not tried | 2013-09-06 12:40 | 2013-09-06 12:40 |
|
|||||
Reporter: | jcvn | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | CBQ not boot with the system. | ||||
Description: | CBQ not boot with the system, Attempt to boot via the / etc / rc.d / rc.ipac cbq start by entering the command in the last exit 0 lilnha before without success. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4566 | [Endian Firewall] Installation | major | always | 2013-09-02 09:29 | 2013-09-05 22:44 |
|
|||||
Reporter: | davvidde | Platform: | ESXi 3.5 | ||
Assigned To: | OS: | 3.5.0 build 988599 | |||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Hang on installation | ||||
Description: | Endian 2.5.1 and 2.5.2 hangs on install. If I change to shell ALT+2 I notice the loop on detecting hardware. I also tried with Boot:nousborpcmcia but the result was the same. | ||||
Steps To Reproduce: | Install from iso file | ||||
Additional Information: | |||||
Attached Files: |
endian_loop.JPG (123,380) 2013-09-02 09:45 https://bugs.endian.com/file_download.php?file_id=1056&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4567 | [Endian Firewall] Proxy - HTTP | minor | always | 2013-09-02 13:17 | 2013-09-02 13:17 |
|
|||||
Reporter: | baldy | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | 2.5.2 CE Squid Zero Sized Reply | ||||
Description: |
After upgrading some 2.5.1 CE systems to 2.5.2 CE Squid is no longer retrieving webpages but instead reports a zero sized reply (screenshot attached) To solve this problem the Squid cache needs to be cleared via Proxy-Cache Management - Clear Cache |
||||
Steps To Reproduce: | 2.5.1 CE with manual proxy enabled, contentfiltering and virusscanning are also active. | ||||
Additional Information: | |||||
Attached Files: |
zerosized.jpg (20,650) 2013-09-02 13:17 https://bugs.endian.com/file_download.php?file_id=1057&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4562 | [Endian Firewall] Other Scripts | minor | always | 2013-08-25 10:06 | 2013-08-30 09:09 |
|
|||||
Reporter: | svoelker | Platform: | Endian Firewall Community 2.5.2 | ||
Assigned To: | luca-endian | OS: | |||
Priority: | normal | OS Version: | 2.5.2 | ||
Status: | confirmed | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | SMART Package Manager Error - SHA256 / Hashlib Python not working. | ||||
Description: |
Since the Update to 2.5.2 the Smart Package manager does not work anymore with SHA256 checksum, this also apprears on a fresh 2.5.2 install from iso. With Endian 2.5.1 everything is working as intendet. |
||||
Steps To Reproduce: |
Add a repo channel with SHA256 signed rpms. for example: smart channel --add CentOS6.2 type=rpm-md name="CentOS6.2" \ baseurl="http://vault.centos.org/6.2/os/i386/" [^] components=base then run: smart update it crashes when it tries to update the repo cache database. |
||||
Additional Information: |
Traceback (most recent call last): File "/usr/bin/smart", line 200, in ? main(sys.argv[1:]) File "/usr/bin/smart", line 173, in main exitcode = iface.run(opts.command, opts.argv) File "/usr/lib/python2.4/site-packages/smart/interface.py", line 53, in run result = _command.main(self._ctrl, opts) File "/usr/lib/python2.4/site-packages/smart/commands/update.py", line 82, in main failed = not ctrl.reloadChannels(channels, caching=NEVER) File "/usr/lib/python2.4/site-packages/smart/control.py", line 388, in reloadChannels if not channel.fetch(self._fetcher, progress): File "/usr/lib/python2.4/site-packages/smart/channels/rpm_md.py", line 287, in fetch fetcher.run(progress=progress) File "/usr/lib/python2.4/site-packages/smart/fetcher.py", line 253, in run if not handler.tick(): File "/usr/lib/python2.4/site-packages/smart/fetcher.py", line 1596, in tick withreason=True) File "/usr/lib/python2.4/site-packages/smart/fetcher.py", line 408, in validate from smart.util.sha256 import sha256 ImportError: No module named sha256 |
||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3492 | [Endian Firewall] Other Services | minor | always | 2011-02-22 11:47 | 2013-08-29 19:39 |
|
|||||
Reporter: | luca-endian | Platform: | |||
Assigned To: | luca-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.4.1 | ||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | no support for untagged packets | ||||
Description: |
Currently there is no support for untagged IEEE 802.1Q packets if on the interface there is already a tagged interface. Ex. eth0.1 vlan 1 eth0.2 vlan 2 but you can't use any more eth0 |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4412 | [Endian Firewall] Other Services | minor | always | 2012-08-01 12:58 | 2013-08-27 07:16 |
|
|||||
Reporter: | barbalarga | Platform: | |||
Assigned To: | daniele-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.5 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Traffic monitoring interface work for only some seconds | ||||
Description: |
Endian version 2.5.1 After I've enabled the traffic monitoring is possible to access on the administrative interface immediatly but for only 30 or 40 seconds then the browser show the following error: "connection refused" If I swith off and then on the traffic monitoring I can access to the administrative interface for another 30/40 seconds and then "connection refused" again. The system access rules is ok. Thank you, best regards. Paolo |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4415 | [Endian Firewall] Other Services | major | always | 2012-08-08 05:25 | 2013-08-27 07:16 |
|
|||||
Reporter: | mhLearn | Platform: | |||
Assigned To: | lorenzo-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.5 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | NTOP / Traffic Monitoring Is Not Working | ||||
Description: |
On Endian Firewall 2.5.1. The NTOP doesn't work even Intrusion is turned off (some reported this issue may due to Intrusion turned on). |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
NTOP_Not Working.jpg (118,547) 2012-08-08 05:25 https://bugs.endian.com/file_download.php?file_id=972&type=bug NTOP_Error.txt (22,010) 2012-10-24 08:46 https://bugs.endian.com/file_download.php?file_id=998&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3527 | [Endian Firewall] Other Services | minor | always | 2011-03-09 10:09 | 2013-08-26 08:41 |
|
|||||
Reporter: | ardit-endian | Platform: | |||
Assigned To: | peter-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.4 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Update clamav | ||||
Description: |
[LibClamAV] *********************************************************** [LibClamAV] *** This version of the ClamAV engine is outdated. *** [LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq [^] *** [LibClamAV] *********************************************************** 2.4 full up to date. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4551 | [Endian Firewall] Other Services | minor | always | 2013-06-12 12:49 | 2013-08-26 08:39 |
|
|||||
Reporter: | baldy | Platform: | |||
Assigned To: | luca-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.5 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | 2.5.1. CE ClamAV Engine needs to be updated. | ||||
Description: |
ClamAV engine is outdated and needs to be updated. [LibClamAV] *********************************************************** [LibClamAV] *** This version of the ClamAV engine is outdated. *** [LibClamAV] *** DON'T PANIC! Read http://www.clamav.net/support/faq [^] [^] *** [LibClamAV] *********************************************************** |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4558 | [Endian Firewall] Installation | minor | always | 2013-08-05 17:05 | 2013-08-06 15:50 |
|
|||||
Reporter: | EDV-Team | Platform: | |||
Assigned To: | luca-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.5 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 2.5 | ||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Endian development channel not reachable when using efw-upgrade or smart update | ||||
Description: |
When switching from Endian stable to development channel with efw-upgrade -s, the devel repository seems to be not reachable at the moment. Here is the output of smart update: --- #smart update Loading cache... Updating cache... ######################################## [100%] Fetching information for 'efw-community'... -> //username@email.com:*@updates.endian.org/devel/.../repomd.xml">http://username@email.com:*@updates.endian.org/devel/.../repomd.xml [//username@email.com:*@updates.endian.org/devel/.../repomd.xml" target="_blank">^] repomd.xml [ 25%] error: Failed acquiring release file for 'efw-community': error: community@updates.endian.org/devel/repodata/repomd.xml:">http://username%40email.com:community@updates.endian.org/devel/repodata/repomd.xml: [community@updates.endian.org/devel/repodata/repomd.xml:" target="_blank">^] File not found --- We need to use the Endian development channel to get our Intel i340 based network card to work. So it would be nice if this could be fixed soon, Thank you very much! |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4172 | [Endian Firewall] Proxy DNS | trivial | always | 2011-09-29 08:41 | 2013-08-01 15:46 |
|
|||||
Reporter: | stefano-endian | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.4 | ||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Broken link to malwaredomains | ||||
Description: |
There is a hyperlink in the DNS proxy, under "Anti spyware", labelled "Learn more about the spyware listening post". The new link should be either http://www.malwaredomains.com/wordpress/?p=1988 [^] or http://doc.emergingthreats.net/bin/view/Main/SpywareListeningPost [^] (here the listening posts are described, so this should be the correct link) |
||||
Steps To Reproduce: |
1. go to Proxy --> DNS --> anti spyware 2. click on the "Learn more about the spyware listening post" link. |
||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4555 | [Endian Firewall] Hardware related (kernel, drivers, hardware) | feature | always | 2013-07-18 13:34 | 2013-07-18 13:34 |
|
|||||
Reporter: | marioeirea | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Support for BCM5717 | ||||
Description: | Please add support for BCM5717 | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4549 | [Endian Firewall] OpenVPN Client and Server | major | always | 2013-05-27 02:27 | 2013-07-12 21:27 |
|
|||||
Reporter: | Sheldmandu | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | OpenVPN client files not created using user.conf.tmpl | ||||
Description: |
It appears the OpenVPN client files are never created on the 2.5.1 version of EFW. There is a /var/openvpn/clients directory but it's empty. Modifying openvpn.conf.tmpl and uncommenting client-config-dir clients and restarting OpenVPN on EFW doesn't achieve anything either. It appears that the file /etc/openvpn/user.conf.tmpl is never actually used to create the client files, which is why its not possible to set a static IP for an OpenVPN client or push a DNS server or domain. This used to work on 2.4.x Please advise of a workaround for the short term, perhaps some script can be run manually to create the files using the user.conf.tmpl |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4553 | [Endian Firewall] Kernel | minor | have not tried | 2013-07-12 04:32 | 2013-07-12 04:32 |
|
|||||
Reporter: | Neddy | Platform: | x64 | ||
Assigned To: | OS: | ||||
Priority: | high | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Number of allowed concurrent connections exceeded | ||||
Description: |
Enabled Endian Firewall and transparent firewall for dozens of users, after half an hour, this messages appear. How could I increase number of concurrent connections? |
||||
Steps To Reproduce: | |||||
Additional Information: |
System 2013-07-12 10:49:49 syslog-ng (2674) Number of allowed concurrent connections exceeded; num="256", max="256" System 2013-07-12 10:49:49 syslog-ng (2674) Number of allowed concurrent connections exceeded; num="256", max="256" System 2013-07-12 10:49:49 syslog-ng (2674) Number of allowed concurrent connections exceeded; num="256", max="256" System 2013-07-12 10:49:49 syslog-ng (2674) Number of allowed concurrent connections exceeded; num="256", max="256" System 2013-07-12 10:49:49 syslog-ng (2674) Number of allowed concurrent connections exceeded; num="256", max="256" |
||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4545 | [Endian Firewall] Proxy - HTTP | major | sometimes | 2013-05-07 13:21 | 2013-06-29 19:10 |
|
|||||
Reporter: | rodrigor.bnu | Platform: | Windows | ||
Assigned To: | OS: | Windows Server | |||
Priority: | high | OS Version: | 2008 R2 | ||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | error squid_ldap_group | ||||
Description: |
Hello guys, I started to test the Endian 2.5.1 and enjoyed. Currently I'm testing on a VM in Hyper-v. Well, already configured for integration with Active Directory and is listing the users and groups usually ok communication. I began to configure some access policies for a group of AD and early functioned properly, but after some time the policies do not work anymore and blocked everything, just out of nowhere. Since this policy is like first. When running a tail-f / var / log / squid / cache.log appear the following errors: user filter '(&(objectClass=person)(sAMAccountName=squid))', searchbase 'dc=edusoft,dc=net' attempting to authenticate user 'CN=squid,CN=Users,DC=edusoft,DC=net' Connected OK group filter '(&(objectClass=person)(sAMAccountName=squid)(memberOf=CN=Suporte,OU=Groups Edusoft,OU=Edusoft,DC=edusoft,DC=net))', searchbase 'dc=edusoft,dc=net' squid_ldap_group WARNING, LDAP search error 'Operations error' Connected OK group filter '(&(objectClass=person)(sAMAccountName=squid)(memberOf=CN=Administrators,CN=Builtin,DC=edusoft,DC=net))', searchbase 'dc=edusoft,dc=net' At another time also appeared the message: Can't contact LDAP server It seems that error is occurring in the validation of the AD group, but when I edit an access policy appears normally AD users and groups. Any idea what it might be? Rodrigo |
||||
Steps To Reproduce: | After login and navigate the links, after some time the links are blocked released. | ||||
Additional Information: | |||||
Attached Files: |
erro_endian.JPG (73,887) 2013-05-07 13:21 https://bugs.endian.com/file_download.php?file_id=1049&type=bug |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
1132 | [Endian Firewall] Migration | minor | have not tried | 2008-07-16 15:44 | 2013-06-05 14:58 |
|
|||||
Reporter: | mablass | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | acknowledged | Product Version: | 2.2-rc1 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Static Routes defined in GUI dont work properly | ||||
Description: |
i definded some static routes in the gui. ping to the destination network worked correctly. ssh for example not. after trying some things out with firewall settings i decided to put the routes directly to the system by using route add -net 1 ... in the efw server. now everything is fine. as the new 2.2. allows to use a gui but the result is not working i guess its a problem :) |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4547 | [Endian Firewall] Application Level Proxies | block | always | 2013-05-21 15:33 | 2013-05-28 09:22 |
|
|||||
Reporter: | ddimitrov@computel.bg | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | HTTP Proxy - (104) Connection reset by peer | ||||
Description: |
Kernel version: 2.6.32.43-57.e48.i686.PAE When HTTP Proxy filter is ON a web page can't be loaded at all (may be the issue will happened with others but I can't say at the moment). Instead, a web page from endian saying "(104) Connection reset by peer" appeares. When I turn the HTTP proxy off I can successfully load the web page in question. The problematic web page is - http://www.minfin.bg. [^] The issue arisen regardless of the browser. Thank you in advance. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Err(104)_.jpg (134,572) 2013-05-21 15:33 https://bugs.endian.com/file_download.php?file_id=1051&type=bug |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4548 | [Endian Firewall] Documentation | minor | N/A | 2013-05-23 14:00 | 2013-05-23 14:00 |
|
|||||
Reporter: | buckmanr | Platform: | |||
Assigned To: | OS: | ||||
Priority: | high | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Please provide documentation in PDF | ||||
Description: |
Online HTML does not print correctly -- exceeds margins. Copy and paste into Word requires excessive time tryint to reformat. Request a PDF of the documentation, please. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4374 | [Endian Firewall] Installation | minor | always | 2012-06-04 19:41 | 2013-05-16 22:23 |
|
|||||
Reporter: | ms | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Installation of Endian Firewall from USB flash drive fails | ||||
Description: |
When trying to install EFW 2.5.1 from an USB flash drive, the installation fails before the first user input is required. The system is booting the vmlinuz which is located on the USB drive. After that the /etc/inittab from instroot.gz is read and /bin/installer is executed. This installer file runs in an endless loop and the VGA display flashes blue/black. Yes, I double-checked the MD5 checksums on the EFW installation ISO file. |
||||
Steps To Reproduce: | |||||
Additional Information: |
I tried several methods to create the USB drive 1. using unetbootin 5.75 (http://unetbootin.sourceforge.net/ [^]) on a Windows plattform 2. dd/copy files from EFW installation CD-ROM to USB drive |
||||
Attached Files: |
mountsource.sh (3,058) 2012-06-04 19:53 https://bugs.endian.com/file_download.php?file_id=950&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4472 | [Endian Firewall] Uncategorized | major | always | 2012-10-22 23:43 | 2013-05-08 05:44 |
|
|||||
Reporter: | marioeirea | Platform: | |||
Assigned To: | luca-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.5 | ||
Product Build: | Resolution: | no change required | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | SIP Proxy Endian 2.5.1 | ||||
Description: | Endian 2.5.1 rewrites sip packets exiting tap1 with the IP to main interface. It also makes the changes inside the SIP packet which makes me believe there is some sort of SIP proxy action. The problem is I cannot find a sip proxy installed and this was a fresh install of Endian 2.5.1 not an upgrade. Is there some daemon running in the back that does these rewrites? Please see attached wire shark sniff. I have removed public IP information. Please note this capture was taken issuing the command: "tcpdump -s 0 -i tap1 -w tap1.pcap" The correct flow show have the internal IP of the phone as the source and not the external IP of the Endian uplink interface. I believe this started happening when I enabled the web proxy in transparent mode with dansguardian but cannot be sure. When the server replies, it replies to the endian public IP address over the public internet. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
tap1 capture.jpg (258,270) 2012-10-22 23:43 https://bugs.endian.com/file_download.php?file_id=997&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4391 | [Endian Firewall] Hardware related (kernel, drivers, hardware) | block | have not tried | 2012-07-06 01:50 | 2013-05-08 01:49 |
|
|||||
Reporter: | diwoda | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | System not recognizing Intel nic based on 82574L | ||||
Description: |
Possibly somehow related to issue 0003451 System has two onboard nics, one is Intel 82574L, the other 82579LM. One of those two nics is not seen by 2.5 in networconfiguration but works just without any problems in 2.4...I think both NICs use the e1000e driver. I've seen a difference in loading network driver as it seems the 2.4 uses 1.2.20-NAPI while 2.5 is loading at the same point 1.0.2-k2. Any idea? |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4544 | [Endian Firewall] Endian Firewall | crash | always | 2013-05-02 07:59 | 2013-05-02 07:59 |
|
|||||
Reporter: | mhellemans | Platform: | |||
Assigned To: | OS: | ||||
Priority: | urgent | OS Version: | |||
Status: | new | Product Version: | 2.2-rc3 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Upgrading to 2.5.1 (Development) causes error code | ||||
Description: |
Running efw-upgrade command result in following error message: ======================== Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 ERROR: Error during upgrade of rpm Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 ERROR: Error during upgrade of rpm Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 ERROR: Error during upgrade of rpm Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 ERROR: Error during upgrade of rpm Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 ERROR: Error during upgrade of rpm Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 ERROR: Error during upgrade of rpm Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 ERROR: Error during upgrade of rpm Committing transaction... Preparing... ######################################## [ 0%] error: file /etc/init.d from install of chkconfig-1.3.11.2-1 conflicts with file from package initscripts-2.2.41-0.endian5 error: file /bin/login from install of util-linux-ng-2.13.1-6_WR.endian5 conflicts with file from package shadow-utils-4.0.3-56.endian1 ERROR: Error during upgrade of rpm ERROR: Error during upgrade of rpm |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4543 | [Endian Firewall] Endian Network | block | always | 2013-05-02 06:59 | 2013-05-02 06:59 |
|
|||||
Reporter: | lorenzo.spinelli | Platform: | endian | ||
Assigned To: | OS: | firewall | |||
Priority: | immediate | OS Version: | community | ||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | green network fault in hyper-v 2012 legacy adapter | ||||
Description: | After few hours from reboot green don't respond. I've 2 uplink network in same hyper-v 2012 network Adapter configuration that work without problem. | ||||
Steps To Reproduce: | Reload. | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4542 | [Endian Firewall] Proxy - HTTP | tweak | always | 2013-05-01 02:37 | 2013-05-01 02:37 |
|
|||||
Reporter: | albertgordojr | Platform: | 2.5.1 | ||
Assigned To: | OS: | ||||
Priority: | high | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | WCCP in Proxy | ||||
Description: |
Hi, It is possible to setup the wccp in proxy? I can see that in version 2.5.1 community, wccp2 is already compiled. I have added the wccp2_* setup in squid template and created a GRE tunnel manually using ip tunnel and ifconfig to up the GRE interface. the problem is, i don't see any tcpdump in the GRE tunnel that I created. It seems the wccp request is not getting to the wccp router. Please help. Thank you. Regards, Albert |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4162 | [Endian Firewall] Proxy HTTP | major | random | 2011-09-20 09:30 | 2013-04-23 14:17 |
|
|||||
Reporter: | luca-endian | Platform: | |||
Assigned To: | ardit-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 2.4.1 | ||
Product Build: | Resolution: | no change required | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | clamd crash, tcp socket should be monitored | ||||
Description: |
Hi Guys, this happens randomly: Sep 2 09:19:46 xxx havp[3818]: Scanner errors: Clamd: Could not connect to scanner socket (lasturl: http://www.google.it/ [^]) Sep 2 09:19:47 xxx havp[3824]: Clamd: Could not connect to scanner! Scanner down? Sep 2 09:20:45 xxx havp[3813]: Clamd: Could not connect to scanner! Scanner down? Sep 2 09:20:45 xxx havp[3811]: Scanner errors: Clamd: Could not connect to scanner socket (lasturl: http://crl.microsoft.com/pki/crl/products/CodeSignPCA2.crl [^]) Sep 2 09:21:06 xxx havp[4051]: Clamd: Could not connect to scanner! Scanner down? Sep 2 09:21:06 xxx havp[4034]: Scanner errors: Clamd: Could not connect to scanner socket (lasturl: http://check.sanasecurity.com/ [^]) Sep 2 09:21:06 xxx havp[4034]: 127.0.0.1 POST 200 http://check.sanasecurity.com/ [^] 264+495 SCANERROR Clamd: Could not connect to scanner socket **POSSIBLE SOLUTION** We should check the clamd socket with monit, which is pretty easy since monit support the CLAMAV protocol! root@xxx:/etc/monit.d # cat clamd.conf check process clamd with pidfile /var/run/clamav/clamd.pid group virus start program = "/etc/init.d/clamd start" stop program = "/etc/init.d/clamd stop" if failed host 127.0.0.1 port 3310 protocol CLAMAV for 5 cycle then restart if 5 restarts within 5 cycles then timeout depends on clamavd_bin mode manual check file clamavd_bin with path /usr/sbin/clamd group virus if failed checksum then unmonitor if failed permission 755 then unmonitor if failed uid root then unmonitor if failed gid root then unmonitor mode manual This would increase reliability for http proxy and smtp proxy as well! What you think? |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3221 | [Endian Firewall] Proxy HTTP | major | sometimes | 2010-10-25 17:41 | 2013-04-16 19:29 |
|
|||||
Reporter: | bortol | Platform: | |||
Assigned To: | lorenzo-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.4 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | http proxy don't returns anything after some time. If flush cache of Squid, the firewall works again correctly | ||||
Description: |
After some utilisation the firewall don't returns pages. Ping is working, dns also. If I flush the cache of squid, proxy is again OK. |
||||
Steps To Reproduce: | |||||
Additional Information: |
In /var/log/squid/cache.log some error TCP connection to 127.0.0.2/9999 failed very frewquently also this: httpReadReply: Excess data from "GET http://cr-tools.clients.google.com/service/check2?appid=%7B430FD4D0-B729-4F6$ [^] other error in cache.log: Initialising SSL. 2010/10/25 13:36:28| Store logging disabled 2010/10/25 13:36:28| Referer logging is disabled. 2010/10/25 13:36:28| DNS Socket created at 0.0.0.0, port 35399, FD 10 2010/10/25 13:36:28| Adding nameserver 127.0.0.1 from /etc/resolv.conf 2010/10/25 13:36:28| helperOpenServers: Starting 20 'ncsa_auth' processes 2010/10/25 13:36:29| Accepting transparently proxied HTTP connections at 0.0.0.0, port 8080, FD 35. 2010/10/25 13:36:29| Accepting SNMP messages on port 3401, FD 36. 2010/10/25 13:36:29| WCCP Disabled. 2010/10/25 13:36:29| Configuring Parent 127.0.0.1/9999/0 2010/10/25 13:36:29| Configuring Parent 127.0.0.2/9999/0 2010/10/25 13:36:29| Configuring Parent 127.0.0.1/9998/0 2010/10/25 13:36:29| Loaded Icons. 2010/10/25 13:36:29| Ready to serve requests. 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| TCP connection to 127.0.0.2/9999 failed 2010/10/25 13:37:11| Detected DEAD Parent: content2 2010/10/25 13:37:11| Failed to select source for 'http://123.123.123.123/wpad.dat' [^] 2010/10/25 13:37:11| always_direct = 0 2010/10/25 13:37:11| never_direct = 1 2010/10/25 13:37:11| timedout = 0 2010/10/25 13:37:12| Failed to select source for 'http://crl.verisign.com/pca3.crl' [^] 2010/10/25 13:37:12| always_direct = 0 2010/10/25 13:37:12| never_direct = 1 2010/10/25 13:37:12| timedout = 0 Sorry for my english and also for my very low technical know-how I've installed endian in my School. Now this problem is blocking navigation everyday.... Luigi |
||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4540 | [Endian Firewall] Endian Firewall | major | always | 2013-04-16 17:25 | 2013-04-16 17:25 |
|
|||||
Reporter: | fernando.guse | Platform: | |||
Assigned To: | OS: | ||||
Priority: | high | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | DUAL LINK WAN | ||||
Description: |
Hello I have the following scenario for Internet access: WAN0 - eth1: RED WAN1 - eth4: RED If I set any of the links as the second link shows MAIN FAILURE with the following log. /var/log/messages Apr 16 13:11:52 LOFW001GFT sudo: nobody : TTY=unknown ; PWD=/home/httpd/cgi-bin ; USER=root ; COMMAND=/etc/rc.d/uplinks start uplink1 --with-hooks Apr 16 13:11:52 LOFW001GFT uplink[uplink1]: Starting Uplink 'uplink1' Apr 16 13:11:53 LOFW001GFT kernel: [ 261.936098] e1000e 0000:01:00.1: irq 30 for MSI/MSI-X Apr 16 13:11:53 LOFW001GFT kernel: [ 261.986175] e1000e 0000:01:00.1: irq 30 for MSI/MSI-X Apr 16 13:11:53 LOFW001GFT kernel: [ 261.986492] ADDRCONF(NETDEV_UP): eth4: link is not ready Apr 16 13:11:53 LOFW001GFT kernel: [ 262.606054] e1000e 0000:01:00.1: irq 30 for MSI/MSI-X Apr 16 13:11:53 LOFW001GFT kernel: [ 262.656051] e1000e 0000:01:00.1: irq 30 for MSI/MSI-X Apr 16 13:11:53 LOFW001GFT kernel: [ 262.656379] ADDRCONF(NETDEV_UP): eth4: link is not ready Apr 16 13:11:53 LOFW001GFT uplink[uplink1]: Notify uplinks daemon about status change of uplink 'uplink1'. Status id FAILED Apr 16 13:11:53 LOFW001GFT uplink[uplink1]: Uplink 'uplink1' status: 'OFFLINE' Apr 16 13:11:53 LOFW001GFT uplink[uplink1]: Could not set up routing As a way to circumvent the problem perform the following activities. 1) Link setup MAIN 2) mv /var/efw/uplinks/uplink1/failure /var/efw/uplinks/uplink1/active 3) ifconfig eth4 200.146.46.254 netmask 255.255.255.248 This way I can climb the two links but it is not the most pleasant thing to do. Would like to help me solve this problem? I await a return. Sincerely. Fernando Guse |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4295 | [Endian Firewall] Other Services | minor | always | 2012-03-08 15:52 | 2013-04-12 16:54 |
|
|||||
Reporter: | shairozan | Platform: | |||
Assigned To: | christian-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.5 | ||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | NTOP Segmentation Fault | ||||
Description: |
Hello everyone, I have noticed an issue with the 2.5.1 EFW Ntop that I wanted to report. After an out-of-the box installation, I tried to activate the NTOP monitoring system. It would run for a while (3-7 minutes) and then stop. /etc/init.d/ntop status would return that ntop is dead, but a PID still exists. I couldn't find any useful logs for ntop outside of monit.log, but it only ever contained information about the system starting and stopping. As such, I launched ntop using the configurations in /etc/ntop/ntop.conf (But I specified to use http 3001 not https 3001). It seemed to work fine for a while, which blew my mind, but eventually it stopped with the following output: Thu Mar 8 10:33:02 2012 THREADMGMT[t2967894960]: SIH: Idle host scan thread running [p9813] Thu Mar 8 10:33:02 2012 THREADMGMT[t2976283568]: SFP: Fingerprint scan thread running [p9813] Thu Mar 8 10:33:02 2012 THREADMGMT[t2917264304]: NPS(WAN): pcapDispatch thread starting [p9813] Thu Mar 8 10:33:02 2012 THREADMGMT[t2917264304]: NPS(WAN): pcapDispatch thread running [p9813] Thu Mar 8 10:33:02 2012 THREADMGMT[t2908875696]: NPS(2): Started thread for network packet sniffing [br0] Thu Mar 8 10:33:02 2012 THREADMGMT[t2900487088]: NPS(3): Started thread for network packet sniffing [eth0] Thu Mar 8 10:33:02 2012 THREADMGMT[t2908875696]: NPS(br0): pcapDispatch thread starting [p9813] Thu Mar 8 10:33:02 2012 THREADMGMT[t2908875696]: NPS(br0): pcapDispatch thread running [p9813] Thu Mar 8 10:33:02 2012 THREADMGMT[t2900487088]: NPS(eth0): pcapDispatch thread starting [p9813] Thu Mar 8 10:33:02 2012 THREADMGMT[t2900487088]: NPS(eth0): pcapDispatch thread running [p9813] ./start_ntop.sh: line 2: 9813 Segmentation fault ntop --user ntop --db-file-path /var/ntop --interface eth1,br0,eth0 --trace-level 3 --https-server 0 --http-server 3001 --disable-schedyield --no-fc It will start every time, but eventually fails with the segmentation fault |
||||
Steps To Reproduce: | |||||
Additional Information: | Attached is the shell script I was using to launch ntop | ||||
Attached Files: |
start_ntop.sh (163) 2012-03-08 15:52 https://bugs.endian.com/file_download.php?file_id=919&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4539 | [Endian Firewall] Uncategorized | major | always | 2013-04-11 10:28 | 2013-04-11 10:34 |
|
|||||
Reporter: | mvldebian | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Sarg generates no access denied | ||||
Description: | By enabling authenticated proxy the SARG can not generate the access denied page. | ||||
Steps To Reproduce: |
Enabling HTTP reports *** Attached print behavior using authenticated proxy |
||||
Additional Information: | When the proxy is transparent SARG generates the page in question. In other reports can also be viewed DENIED beside the URL accessed. | ||||
Attached Files: |
Sem título.png (5,796) 2013-04-11 10:28 https://bugs.endian.com/file_download.php?file_id=1046&type=bug transparent_proxy.png (52,981) 2013-04-11 10:34 https://bugs.endian.com/file_download.php?file_id=1047&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4532 | [Endian Firewall] OpenVPN Client and Server | major | always | 2013-02-19 05:31 | 2013-04-07 16:40 |
|
|||||
Reporter: | d072330 | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | 2.5.1 DNS issue openvpn | ||||
Description: |
I have installed 2.5.1 several times now on different hardware and version 2.5.1 will not push DNS serves to clients. Clients can ping and get to servers by IP but not FQDN. If I install 2.5.0 it pushes the DNS servers every time. It looks to us that the OpenVPN version is the same in both versions so why does one version push DNS and the other does not? Any suggestions before I rebuild to 2.5.0? |
||||
Steps To Reproduce: | Install 2.5.1 with same OpenVPN settings and firewall rules as 2.5.0. | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4231 | [Endian Firewall] Installation | tweak | always | 2011-12-29 20:59 | 2013-04-07 04:08 |
|
|||||
Reporter: | piratpl | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | "Your Harddisk is to small" error message during install of 2.5 version | ||||
Description: | When installing 2.5 on VMware with a disk 15GB or less the installation fails with an error message "Your harddisk is to small" sh: -c line 0: unexpected EOF while looking for matching '" | ||||
Steps To Reproduce: | |||||
Additional Information: |
It could very well be that you need a bigger hd to install 2.5 however, I was able to install 2.41 on a 10GB drive. I didn't find the minimum hd requirement during my install as i'm limited to 15 GB at the moment. |
||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
2464 | [Endian Firewall] Firewall (iptables) | major | always | 2009-12-01 03:53 | 2013-04-03 10:09 |
|
|||||
Reporter: | vikash | Platform: | |||
Assigned To: | peter-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | confirmed | Product Version: | 2.3 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | future | ||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Snort blocks smb and netbios over VPN despite FW rule | ||||
Description: |
Ive got EFW 2.3 with openvpn and client is a roadwarrior. VPN works fine ie. I can ping and SSH to machines on the GREEN zone to/from the openvpn client. PING OK : VPN client <----> GREEN zone SSH OK : VPN client <----> GREEN zone smb/netbios BLOCKED : VPN client <----> GREEN zone After almost a week I figured out that snort(IPS) will block smb and netbios over the VPN despite the VPN firewall rule to allow all access, also same result if VPN firewall is disabled. If I switch off IPS then file and print sharing WORKS. There is nothing in the logs about these packets being blocked otherwise I would have found out much earlier. Please advise a fix to this. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4538 | [Endian Firewall] GUI | minor | always | 2013-04-03 07:26 | 2013-04-03 07:28 |
|
|||||
Reporter: | mgr9500 | Platform: | |||
Assigned To: | OS: | ||||
Priority: | high | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | calaendar problem, duplice day | ||||
Description: |
in month 3 day 16 duplicate at year 2013 and in year 2012 day 17 duplicate place after remove this bug send for me. mgr9500@yahoo.com |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4497 | [Endian Firewall] OpenVPN Client and Server | minor | always | 2012-11-14 08:34 | 2013-03-22 16:26 |
|
|||||
Reporter: | ipanema211 | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Openvpn GUI settings not saved to settings file - settings file resets when saving via GUI | ||||
Description: |
Hello, I upgraded our firewall from 2.4.1 to 2.5. I restored a backup to do this, mainly because we have around 150 openvpn users I didn't want to recreate. When I try to save global options in the GUI, nothing is saved to the /etc/openvpn.conf file. When I edit the conf file and restart the Openvpn service through SSH, everything is OK and the options are pushed correctly. The options aren't displayed in the GUI though. When I then try to change a global option in the GUI, or even just click the save & restart button in the GUI, the openvpn.conf file gets reset to default, and my clients receive the DNS servers below instead of their correct ones (at that moment no DNS servers are defined in the conf file because of the reset) DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 Thanks! |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3432 | [Endian Firewall] Proxy HTTP | major | always | 2011-01-14 16:06 | 2013-03-11 08:41 |
|
|||||
Reporter: | ardit-endian | Platform: | |||
Assigned To: | peter-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.4.1 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | HAVP => no youtube videos from iphone & ipad | ||||
Description: |
When HAVP is enabled we are unable to see youtube videos with iphone or ipad. when is disabled the problem disappears. The issue is reproducible and the zone is indifferent (green/orange or blue). I noticed testing this that the cause is havp but no error message in the log. System tested was full up-to-date. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4535 | [Endian Firewall] VPN - IPSec | major | always | 2013-03-01 02:15 | 2013-03-01 02:15 |
|
|||||
Reporter: | EduSuzuki | Platform: | Endian 2.5 Community | ||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Endian 2.5 Community does not accept special characters in the PSK | ||||
Description: |
I'm trying to use a PSK for the establishment of an IPsec tunnel. This PSK contains some special characters, such as * and &. When I try to set this PSK up at an Endian 2.5 Community firewall, it complains about these characters with an error message like this: "Invalid characters found in the pre-shared key." I've searched the issues database and found the issue 0000613 where the situation is the same. The responsible for the ticket says it's solved but I'm facing the same issue on version 2.5. Please help me out. |
||||
Steps To Reproduce: |
Set up a new IPsec connection. Use PSK as the authentication method for the 1st phase of the IPsec tunnel establishment. Use a pre-shared key that has special characters. E.g.: PsK_913*& |
||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
1151 | [Endian Firewall] Firewall (iptables) | crash | always | 2008-07-23 10:10 | 2013-02-22 13:58 |
|
|||||
Reporter: | jasonwalls | Platform: | |||
Assigned To: | peter-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | confirmed | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | future | ||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | portforwarding: unable to access GREEN from GREEN via RED portforward rule | ||||
Description: |
as per summary, a device on the GREEN network is unable to access another device on the GREEN network, by using the RED interface and portforwarding. we configure mobile devices to access resources on the GREEN network, by using the RED device and port forwarding. they can operate onsite and offsite (without vpn) this way. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4221 | [Endian Firewall] Kernel | block | have not tried | 2011-12-09 16:17 | 2013-02-21 04:52 |
|
|||||
Reporter: | ardit-endian | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | confirmed | Product Version: | 2.4.1 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | kernel : xt_TCPMSS: bad length (1024 bytes) + PATCH | ||||
Description: |
Hi, a customer with 500+ concurrent voip connection (a 16 cores workstation) saying that the firewall "crashed" due to heavy voip traffic. When logged in this is what I recall interesting: http://pastie.org/2991370 [^] Leaving the other problems (already know what and why) and focusing to the kernel message I found that is related with netfilter, an the matching rule (MSS) is located in mangle, chain: Chain FORWARD (policy ACCEPT 231M packets, 33G bytes) pkts bytes target prot opt in out source destination 1217K 66M TCPMSS tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU http://rhkernel.org/#RHEL6+2.6.32-71.18.2.el6/net/netfilter/xt_TCPMSS.c [^] 63 /* Since it passed flags test in tcp match, we know it is is 64 not a fragment, and has data >= tcp header length. SYN 65 packets should not contain data: if they did, then we risk 66 running over MTU, sending Frag Needed and breaking things 67 badly. --RR */ 68 if (tcplen != tcph->doff*4) { 69 if (net_ratelimit()) 70 printk(KERN_ERR "xt_TCPMSS: bad length (%u bytes)\n", 71 skb->len); 72 return -1; 73 } So the error is caused for 2 reasons: 1) Syn packets which contains data (normally not allowed) 2) TCP header larger than the packet itself It's rare to reproduce because on rare occasions is produced this kind of traffic, however there is already a patch on this problem (I belive it's included in the vanilla). PATCH: http://www.gossamer-threads.com/lists/linux/kernel/1180390?do=post_view_threaded [^] |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
log.txt (2,467) 2011-12-09 16:22 https://bugs.endian.com/file_download.php?file_id=895&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4531 | [Endian Firewall] Proxy HTTP | major | always | 2013-02-19 00:35 | 2013-02-19 00:50 |
|
|||||
Reporter: | Sheldmandu | Platform: | Any | ||
Assigned To: | OS: | Any | |||
Priority: | normal | OS Version: | Any | ||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Policy Routing not working with HTTP Proxy turned on | ||||
Description: | Network Policy Routing does not work when HTTP Proxy is enabled and access is through the HTTP Proxy (only tested transparent proxy). | ||||
Steps To Reproduce: |
Setup 2 WAN (Red) interfaces. Enable HTTP Proxy and set to transparent on Green. Create a Policy Route to route HTTP traffic via the additional uplink (not the main one). Go to whatismyip.com to see your IP address. It's still that of the main uplink. Turn off the HTTP Proxy or change to non-transparent on Green. Go to whatismyip.com to see your IP address. Notice that it is now of the additional uplink (as it should be). |
||||
Additional Information: | Product version is 2.5.1 | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4530 | [Endian Firewall] Network related (VPN, uplinks) | crash | always | 2013-02-12 23:52 | 2013-02-13 00:11 |
|
|||||
Reporter: | mario79 | Platform: | Endian community | ||
Assigned To: | OS: | ||||
Priority: | high | OS Version: | 2.5.1 | ||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Dual wan fail... | ||||
Description: |
Hi all. I have a problem with dual wan. I have 4 network interfaces: eth0 - Green eth1 - Orange eth2 - Blue eth3 - Red eth5 - other You configure the interfaces, which will eth5 main backup. Disconnect the main interface, but does not activate the backup link. Thank you. |
||||
Steps To Reproduce: | |||||
Additional Information: | Endian Community 2.5.1. | ||||
Attached Files: |
config gui.zip (189,559) 2013-02-12 23:52 https://bugs.endian.com/file_download.php?file_id=1041&type=bug |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
1266 | [Endian Firewall] GUI | feature | always | 2008-08-09 06:17 | 2013-02-09 22:53 |
|
|||||
Reporter: | kfason | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.2-rc2 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Add OpenDNS support | ||||
Description: |
OpenDNS is a great service that should be included in EFW. Some ideas I have are in System | Network Configuration | DNS page. In addition to auto or manual, add checkbox to use OpenDNS servers. Maybe include ability of sort order. i.e. use OpenDNS first, then the DNS servers provided by DHCP on red or vise versa. The other place would be under Services | Dynamic DNS. If a DDNS is setup, have a checkbox to also update the OpenDNS service for the additional stuff such as stats. |
||||
Steps To Reproduce: | |||||
Additional Information: | http://www.opendns.com [^] | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4307 | [Endian Firewall] GUI | tweak | always | 2012-03-28 13:37 | 2013-02-07 17:25 |
|
|||||
Reporter: | baldy | Platform: | |||
Assigned To: | davide-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.5 | ||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Time value for Uptime is not displayed correctly | ||||
Description: |
On the Dashboard the system uptime is shown incorrect. The value for hours is the total amount of hours the system is up and running, not the value that should be shown when the days are subtracted. |
||||
Steps To Reproduce: | |||||
Additional Information: |
In the attached picture the system uptime is shown as 32 days 790 hours and 46 minutes Correct calculation would be 32 days 21 hours and 46 minutes |
||||
Attached Files: |
GUI Time.jpg (5,725) 2012-03-28 13:37 https://bugs.endian.com/file_download.php?file_id=922&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3746 | [Endian Firewall] GUI | minor | always | 2011-05-16 23:13 | 2013-02-03 01:59 |
|
|||||
Reporter: | gmar_87 | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.4.1 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Traffic graphs limited to 1.2 MBps | ||||
Description: |
Traffic graphs do not show speeds greater than 1.2 MBps. When traffic exceeds 1.2 MBps the graph is not plotted (see screenshot attached). I was downloading at 4MBps to test this and the outgoing line (blue) disappeared from the graph. |
||||
Steps To Reproduce: | |||||
Additional Information: |
This happens on 2.3, 2.4 and 2.4.1 installations. We have a 40Mbps/40Mbps connection and would like to correct graphical representation. |
||||
Attached Files: |
Endian2-4-1_TrafficGraphs.jpg (56,476) 2011-05-16 23:13 https://bugs.endian.com/file_download.php?file_id=719&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4524 | [Endian Firewall] Endian Firewall | minor | N/A | 2013-01-31 01:15 | 2013-01-31 01:15 |
|
|||||
Reporter: | pcphilippe1 | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.2 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Unable to to upgrade | ||||
Description: |
Hello every time I run the Smart upgrade command I get this conflict error: file /home/httpd/html/include/servicesubscriber.js from install of efw-guilib-2.4.3-0.endian5 conflicts with file from package efw-base-2.6.127.2-1.endian9 |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4523 | [Endian Firewall] Documentation | minor | always | 2013-01-30 20:01 | 2013-01-30 20:01 |
|
|||||
Reporter: | yhenao | Platform: | endian | ||
Assigned To: | OS: | 2.5 | |||
Priority: | normal | OS Version: | 2.5 | ||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | There is not dashboard.cgi | ||||
Description: |
Hello I have found the dashboard.cgi but it is not possible. Before i had on /home/httpd/cgi-bin a dashboard.cgi file, bit dont now. I have seen a /manage/dashboard on my web browser, but i can not find it. Could you say me where is it? Best regards, Yanmidt |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4522 | [Endian Firewall] GUI | minor | N/A | 2013-01-13 03:52 | 2013-01-13 03:52 |
|
|||||
Reporter: | marioeirea | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Ability to allow and deny specific URLs from GUI | ||||
Description: | Would be nice if the GUI was extended to allow modification of exceptionurllist and bannedurllist from content filter profile editor. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4521 | [Endian Firewall] Other Services | minor | always | 2013-01-10 20:00 | 2013-01-10 20:00 |
|
|||||
Reporter: | danw-rite | Platform: | |||
Assigned To: | OS: | ||||
Priority: | high | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Traffic Monitoring | ||||
Description: | When I turn on traffic monitoring and then click on the the administrative interface and try to browse to it, I never make it there. The error is that the page is not available. | ||||
Steps To Reproduce: | I go to services and then traffic monitoring, enable traffic monitoring and then click on the link to the administrative interface. The web page then errors out. | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3853 | [Endian Firewall] Proxy HTTP | major | always | 2011-06-03 12:10 | 2012-12-24 16:32 |
|
|||||
Reporter: | datapharmer | Platform: | |||
Assigned To: | lorenzo-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.4.1 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | transparent proxy does not start properly at boot | ||||
Description: | I am running endian 2.4.1 community edition (2.6.32.25-57.e40.i586) on a dell poweredge 1850. The proxy is configured to be transparent with havp and dansguardian, squid and content filtering enabled. When booting, no users can access the internet, there are no messages or responses to the browser, it is as if the proxy is not running at all, but internal systems that are set to bypass the transparent proxy can get to the internet just fine. Switching the proxy to be non-transparent, turning it off, back on, and then switching to transparent resolves the issue, but this is a pretty big problem if there isn't someone there to perform this from the GUI. | ||||
Steps To Reproduce: | |||||
Additional Information: | The problem also sometimes occurs if there are changes made to the proxy settings that cause it to need to restart, repeating the same process of switching to non-transparent, stopping, starting, and switching back to transparent seems to work in this situation as well. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4452 | [Endian Firewall] Other Services | major | always | 2012-09-25 08:53 | 2012-12-24 16:29 |
|
|||||
Reporter: | luke-endian | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | monit does not restart dansguardian correctly | ||||
Description: |
Hi guys if you restart dansguardian using "monit restart dansguardian", this procedure fails 8/10 times. The same problem occur if you change the content filter confguration from gui and then press apply button,when jobsengine tells to monit to restart the service you can see that 9999 port is used by dansguardian and if you run "ps aux |grep dansguardian" you can see the dansguardian processes,but in /var/run the dansguardian.pid file is empty! Monit checks that file to verify if dansguardian is running or not and if that file is empty monit thinks that the process is dead and runs only the start process and not the stop,so until you don't kill all the DansGuardian processes and delete /var/run/dansguardian.pid file, monit is unable to start dansguardian service.This problem occur on 2.5 macro and 2.5 intel |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
monit_dg (4,505) 2012-09-25 08:54 https://bugs.endian.com/file_download.php?file_id=989&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4520 | [Endian Firewall] Endian Firewall | minor | have not tried | 2012-12-19 09:44 | 2012-12-19 09:51 |
|
|||||
Reporter: | rvc.rajkumar | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Want To Allow External SqlServer | ||||
Description: |
I want my firewall to allow all internal ip(192.168.2.---) to access the sql server outside the firewall diffrent ip(**.**.***.*9) |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4519 | [Endian Firewall] Log and Statistics | crash | have not tried | 2012-12-17 14:06 | 2012-12-17 14:06 |
|
|||||
Reporter: | mario79 | Platform: | Endian community | ||
Assigned To: | OS: | ||||
Priority: | urgent | OS Version: | 2.5.1 | ||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | full /var/log/ | ||||
Description: |
Good day. I have problem with internet, with the proxy users, then, i watch on Dashboard, that the partition /var/log/ is full. For resolved this problem, disable proxy. How to delete the logs?, What is the path? May i change the partition /var/log in other partition /var/log2? ¿how to? Thanks, and sorry for my english. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4518 | [Endian Firewall] Intrusion Prevention | minor | always | 2012-12-17 07:32 | 2012-12-17 07:32 |
|
|||||
Reporter: | simontkksimontkk | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Intrusion prevention system not able to generate log./ no live log | ||||
Description: |
Version:2.5.1 Dear All, First: Currently i faced a problems that ,my live log for Instruction prevention is not coming out although i have already activate Instruction prevention system under "services"? Can anyone guide me, where show i activate this feature? Second: Previosly, i also faced a problems on no log generate for firewall. The firewall log will only come out after i restart the firewall again. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4470 | [Endian Firewall] Network related (VPN, uplinks) | minor | always | 2012-10-19 10:03 | 2012-12-04 04:27 |
|
|||||
Reporter: | mhLearn | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Inter-zone Traffic And Policy Routing Issue | ||||
Description: |
Hi, Not sure if this is a bug or it was supposed the way on version 2.5.1. Traffic from Orange zone to Green zone on open ports was failed when Policy Routing was applied to Orange zone too. By just setting up a rule on Inter-zone Traffic, where Orange -> Green, <ports> the traffic would be dropped, as logged in firewall log as "ZoneFW.Drop" To solve this, do following, 1. Setup Static Routing, and enable it Source Network: <Orange Zone Net IP/CIDR> Destination Network: <Green Zone Net IP/CIDR> Route Via -> Static IP : <Green Zone Gateway IP> 2. Setup Inter-zone Traffic, and enable it Orange -> Green, <ports> 3. Apply the Policy Routing that you want Doesn't matter of the steps sequence, once all setup properly, it would work. |
||||
Steps To Reproduce: | |||||
Additional Information: |
In my case, Endian Firewall was setup with BLUE, ORANGE and GREEN Zones. The Policy Routing was setup to divert all traffic from ORANGE and BLUE zone to use 2nd uplink connection, where GREEN zone was using main uplink card. |
||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4390 | [Endian Firewall] Network related (VPN, uplinks) | crash | have not tried | 2012-07-05 14:58 | 2012-12-04 04:25 |
|
|||||
Reporter: | mhLearn | Platform: | |||
Assigned To: | lorenzo-endian | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | PPPoE Connection Failed | ||||
Description: | After reboot the system few times within hour through the webgui, the pppoe connection was connected for 0.2 minutes, and then disconnected. This kept repeating. | ||||
Steps To Reproduce: | |||||
Additional Information: |
EFW 2.5.1 |
||||
Attached Files: |
EFW_PPPoE_Crashed.txt (13,035) 2012-07-05 14:58 https://bugs.endian.com/file_download.php?file_id=962&type=bug |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4514 | [Endian Firewall] Endian Firewall | feature | N/A | 2012-12-04 03:59 | 2012-12-04 04:25 |
|
|||||
Reporter: | mhLearn | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Blocking Unknown MAC With Static IP | ||||
Description: |
Hi, Just finding a way to block any unknown device configured with static IP and got connected to internet, either via wireless or wired. Currently, even enabled "Allow Only Fixed Leases" on DHCP setup, if a device was set with static IP, it still able get internet access or access other same zone computers. Is that any where to block it? Thanks |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4478 | [Endian Firewall] Endian Firewall | major | always | 2012-11-01 19:34 | 2012-12-03 17:40 |
|
|||||
Reporter: | Tecnic | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Endian Firewall Issues on VPN traffic | ||||
Description: |
The Endian Firewall 2.5.1 "VPN Traffic" with this problem in establishing safety rules. Rules created based on the source MAC, IP and User Open VPN does not work. Only works when used and the Origin and <any> Zone / Interface, in these two cases and can gain access. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4454 | [Endian Firewall] Hotspot | minor | always | 2012-09-26 14:51 | 2012-11-29 16:50 |
|
|||||
Reporter: | thomas-endian | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | corrupt Next Button self-service report gui | ||||
Description: |
Button “Next” under Hotspot > Reports > SmartConnect Transactions is corrupt, he create the following error (message in the GUI: Not found): Sep 26 16:02:56 ENDIAN-EE emi[5533]: _cp_on_http_error status: 404 message: The path '/manage/hotspotgui/selfservice/count-1 >= offset + offset_step' was not found. request_path: /manage/hotspotgui/selfservice/count-1 >= offset + offset_step handler: None Any other buttons works… Maybe the line 86 under /usr/lib/python2.4/site-packages/endian/hotspotgui/web/templates/selfservice_list.mak is not correct: % if (count - 1) >= (offset + offset_step): count-1 >= offset + offset_step |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4511 | [Endian Firewall] Log and Statistics | major | always | 2012-11-28 07:02 | 2012-11-28 07:02 |
|
|||||
Reporter: | goreXP | Platform: | |||
Assigned To: | OS: | ||||
Priority: | urgent | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Cannot access HTTP and Content filter logs | ||||
Description: |
When I access these "Proxy" from "Logs" menu: Logs --> Proxy --> HTTP Logs --> Proxy --> Content filter I get a STOP sign img and "The Endian Management Interface encountered an error. Please contact an administrator." message. |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
http_proxy_log_viewer.png (58,387) 2012-11-28 07:02 https://bugs.endian.com/file_download.php?file_id=1034&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4508 | [Endian Firewall] Hardware related (kernel, drivers, hardware) | feature | have not tried | 2012-11-25 16:57 | 2012-11-25 16:57 |
|
|||||
Reporter: | bogdan1 | Platform: | ARM | ||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | 2.5.1 ARM | ||||
Description: |
Hello My question is, Is it possible to run EFW community on ARM (raspberry Pi ). Best regards |
||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4350 | [Endian Firewall] Uncategorized | major | random | 2012-05-07 13:41 | 2012-11-22 20:43 |
|
|||||
Reporter: | marioeirea | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | Dansguardian filtering slows pages loads | ||||
Description: | After operating for a while, dansguardian will slow filtered pages down to a crawl. Issuing the command "/etc/init.d/dansguardian restart" temporarily fixes the problem. This does not affect people on the allow list in the access policies which means this is a dansguardian problem. This is affecting clients on 2.5.1 and was not an issue in 2.4.1. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4500 | [Endian Firewall] Proxy - STMP | minor | always | 2012-11-15 13:46 | 2012-11-15 16:13 |
|
|||||
Reporter: | baldy | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 2.5 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Customer Importance: | |||||
Customer Occurrences: | |||||
Queue: | |||||
|
|||||
Summary: | DNSBL provider dsn.rfc-ignorant.org will be shutdown completely bij november 30th | ||||
Description: | dsn.rfc-ign |