SYSTEM WARNING: 'date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.' in '/usr/share/mantis/www/core.php' line 264

0001976: unactive uplinks become managed after a reboot - MantisBT
MantisBT - Endian Firewall
View Issue Details
0001976Endian FirewallNetwork related (VPN, uplinks)public2009-06-30 12:252010-09-21 19:37
luca-endian 
 
normalminoralways
confirmedopen 
2.2-rc3 
future 
0001976: unactive uplinks become managed after a reboot
If you deactivate an uplink on the main page and then reboot the firewall it becomes managed.

Tested with a pppoe uplink
purple
Issue History
2009-06-30 12:25luca-endianNew Issue
2009-06-30 12:25luca-endianAssigned To => peter-endian
2009-06-30 12:26luca-endianStatusnew => confirmed
2009-06-30 12:26luca-endianDescription Updated
2009-06-30 12:27luca-endianTag Attached: purple
2009-06-30 13:25peter-endianNote Added: 0002705
2009-06-30 13:26peter-endianNote Added: 0002706
2009-06-30 13:55luca-endianNote Added: 0002709
2009-06-30 14:14luca-endianNote Added: 0002712
2009-06-30 14:15luca-endianNote Edited: 0002709
2009-06-30 14:55peter-endianNote Added: 0002713
2009-11-25 17:53peter-endianAssigned Topeter-endian =>
2010-09-21 19:37peter-endianTarget Version => future

Notes
(0002705)
peter-endian   
2009-06-30 13:25   
only on the main page?

does it also happen if you use the interface editor and set the uplink "disabled" or autostart off?
(0002706)
peter-endian   
2009-06-30 13:26   
if the uplink is autostart=on and enabled=on during boot the managed flag will be set to on
(0002709)
luca-endian   
2009-06-30 13:55   
(edited on: 2009-06-30 14:15)
If I set enabled=off, autostart=off, managed=off the uplink doesn't start (correct)

(0002712)
luca-endian   
2009-06-30 14:14   
If I set enabled=off, autostart=on, managed=off the uplink doesn't start (correct ?)
and the values are then:
enabled=off, autostart=on, managed=on
(0002713)
peter-endian   
2009-06-30 14:55   
if enabled=off it should not start
if enabled=on, autostart=on, managed=off, on next boot managed turns back on