SYSTEM WARNING: 'date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.' in '/usr/share/mantis/www/core.php' line 264

0002665: VPN to farend Netgear, once traffic routes over link, Endian server halts - no console response - MantisBT
MantisBT - Endian Firewall
View Issue Details
0002665Endian FirewallNetwork related (VPN, uplinks)public2010-02-10 20:062010-02-11 10:29
kristiandg 
 
normalcrashalways
closedduplicate 
2.3 
 
0002665: VPN to farend Netgear, once traffic routes over link, Endian server halts - no console response
I've recently installed Endian 2.3 on an HP DL385 server (2.8Ghz Xeon/2GB ram/ 18GB Raid 1).

Once I deployed it, I created an IPSEC tunnel back to my location, which has a Netgear FVX538. The tunnel shows connected on both sides. The second I point traffic from the Endian-side network over the link (from the current gateway), Endian halts. Console has no response at all and web page fails. I have to power-cycle to restore service.

I'm new to Endian, so I'm not too sure where to grab the logs (except from the web interface), or if its even getting a chance to write to the logs when it fails. If you tell me what you need, I'll be happy to extract it.
No tags attached.
duplicate of 0001359closed  IPSEC 2.2 crashes system 
Issue History
2010-02-10 20:06kristiandgNew Issue
2010-02-11 10:29peter-endianRelationship addedduplicate of 0001359
2010-02-11 10:29peter-endianNote Added: 0003764
2010-02-11 10:29peter-endianStatusnew => closed
2010-02-11 10:29peter-endianResolutionopen => duplicate

Notes
(0003764)
peter-endian   
2010-02-11 10:29   
duplicate of 0001359.