SYSTEM WARNING: 'date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.' in '/usr/share/mantis/www/core.php' line 264

0000338: Install fails - MantisBT
MantisBT - Endian Firewall
View Issue Details
0000338Endian FirewallInstallationpublic2007-11-23 19:592007-12-31 19:11
0000338: Install fails
Detect hardware: modprobe:fatal:could not load/lib/modules/2.6.9-550.6.EL.endian22-smp/modules-dep:No such file or directory

Network setup failed - on screen

Green side assignment of IP address in window
Press OK to reboot

etc/updf stab.conf - on bottom of screen
I am running a FIC AZ11EA mother board with a 900 mhz AMD processor, 10 gig maxtor drive, 784 mbs of ram, an old AGP Diamond Multimedia video card and 2 - 3com 3C905C TX-M network cards. This is the same exact configuration used when running 2.1 on this machine. I had no errors on install or while running 2.1.

The hardrive was wiped prior to each install with a USA DOD approved wiping program. Problem was repeated 5 times. Used recommended nonpcmia, usb and dma commands on install with same results.
No tags attached.
Issue History
2007-11-23 19:59fiscomNew Issue
2007-11-27 19:06AnonymousStatusnew => feedback
2007-11-27 19:15AnonymousNote Added: 0000670
2007-11-27 19:15AnonymousStatusfeedback => confirmed
2007-12-01 21:12alexbogusNote Added: 0000677
2007-12-01 21:46peter-endianStatusconfirmed => resolved
2007-12-01 21:46peter-endianFixed in Version => 2.2
2007-12-01 21:46peter-endianResolutionopen => fixed
2007-12-01 21:46peter-endianAssigned To => peter-endian
2007-12-01 21:46peter-endianNote Added: 0000680
2007-12-31 15:05raphael-endianFixed in Version2.2-beta1 => 2.2-beta2
2007-12-31 19:11raphael-endianStatusresolved => closed

2007-11-27 19:15   
I have had the exact same error using 2 seperate PC's
2007-12-01 21:12   
Same error with 3 nics

- 3Com 3C905B
- Realtek RTL8139D
- Realtek RTL8139C
2007-12-01 21:46   
You can safely consider this as warning only. This should not affect anything during installation procedures.

Next version will not print this out anymore.