SYSTEM WARNING: 'date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.' in '/usr/share/mantis/www/core.php' line 264

0003124: ntop won't show remote traffic - MantisBT Endian Bugtracker
Endian Issue Tracker

Please see now our new Bugtracker system: JIRA

View Issue Details Jump to Notes ] Issue History ] Print ]
IDProjectCategoryView StatusDate SubmittedLast Update
0003124Endian FirewallOther Servicespublic2010-08-23 14:232010-12-09 14:58
Assigned To 
PlatformOSOS Version
Product Version2.4 
Target VersionFixed in Version 
Summary0003124: ntop won't show remote traffic

I've installed EFW 2.4, and when i go to ntop IP -> Traffic directions -> local to remote or remote to local i get this message:

No Data To Display (yet)

I've got two red interfaces on my EFW, and, it seems that ntop is considering the traffic that goes to those interface as local.

Could be a bug of ntop or bad configuration?

TagsNo tags attached.
Attached Files

- Relationships

-  Notes
peter-endian (administrator)
2010-09-20 15:33

it is indeed local, since those ip addresses are addresses of the host itself.

does it produce data after a while when you connect to the outside?

besides ntop is not integrated very well. it listens only on the green bridge interface for example, so only traffic coming from/going to green is analysed
mvrk (reporter)
2010-12-09 14:58

No it doesn't produce data after a while.

I remember that before it was working because i had my modem connected directly to EFW, so the IP on the RED interface was my internet IP, but when my ISP changed the modem to a router (and this router has no "only modem" function) it stopped working because now my RED interface has an IP on the router local network.

As workaround, i changed the initscript of ntop to listen also on the RED interface.

- Issue History
Date Modified Username Field Change
2010-08-23 14:23 mvrk New Issue
2010-09-20 15:33 peter-endian Note Added: 0004760
2010-09-20 15:33 peter-endian Status new => feedback
2010-12-09 14:58 mvrk Note Added: 0005344

Copyright © 2005-2008 Endian, SRL. All rights reserved.

Copyright © 2000 - 2012 MantisBT Group
Powered by Mantis Bugtracker