SYSTEM WARNING: 'date_default_timezone_get(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.' in '/usr/share/mantis/www/core.php' line 264

0003746: Traffic graphs limited to 1.2 MBps - MantisBT Endian Bugtracker
Endian Issue Tracker

Please see now our new Bugtracker system: JIRA

View Issue Details Jump to Notes ] Issue History ] Print ]
IDProjectCategoryView StatusDate SubmittedLast Update
0003746Endian FirewallGUIpublic2011-05-16 23:132013-02-03 01:59
Assigned To 
PlatformOSOS Version
Product Version2.4.1 
Target VersionFixed in Version 
Summary0003746: Traffic graphs limited to 1.2 MBps
DescriptionTraffic graphs do not show speeds greater than 1.2 MBps.
When traffic exceeds 1.2 MBps the graph is not plotted (see screenshot attached).
I was downloading at 4MBps to test this and the outgoing line (blue) disappeared from the graph.
Additional InformationThis happens on 2.3, 2.4 and 2.4.1 installations.
We have a 40Mbps/40Mbps connection and would like to correct graphical representation.
TagsNo tags attached.
Attached Filesjpg file icon Endian2-4-1_TrafficGraphs.jpg [^] (56,476 bytes) 2011-05-16 23:13

- Relationships

-  Notes
gmar_87 (reporter)
2013-02-03 01:47

Decided to re-visit this and found the issue :)

There is a hard-coded limit for traffic RRD's in /usr/local/bin/
I have change this limit from 1.25Mbps to 1Gbps and confirmed traffic graphs now display correctly.

The following steps change traffic graph limits to 1Gbps and reset the graphs (old data no longer shown).

1. Open /usr/local/bin/
2. Locate "sub updateifdata" function
3. Replace:



4. Delete or rename existing traffic RRD's in /var/log/rrd (eg. RED.rrd, GREEN.rrd)
5. Execute /usr/local/bin/
6. Browse to traffic graphs in EFW web interface and confirm traffic graphs have been reset. You may need to clear your browser cache or press Ctrl+F5
7. Simulate traffic by transferring a large file from yout LAN to your EFW box via SCP and check graphs.
gmar_87 (reporter)
2013-02-03 01:59

BTW, can you please release this patch as the issue still exists in 2.5.1

- Issue History
Date Modified Username Field Change
2011-05-16 23:13 gmar_87 New Issue
2011-05-16 23:13 gmar_87 File Added: Endian2-4-1_TrafficGraphs.jpg
2013-02-03 01:47 gmar_87 Note Added: 0008365
2013-02-03 01:59 gmar_87 Note Added: 0008366

Copyright © 2005-2008 Endian, SRL. All rights reserved.

Copyright © 2000 - 2012 MantisBT Group
Powered by Mantis Bugtracker